These Bevel Gears come in pairs, with both gears having differing numbers of teeth. As Bevel Gear pairs are never identical they are supplied in matched left and right-handed pairs.. . Cut to the Gleason System. 20° pressure angle. Bore tolerance H8. DIN 3964, DIN 3967, DIN 3971. Supplied in pairs. Available in 1.5:1, 2:1, 3: & 4:1 ratios. All dimensions in mm.. Shaft axes to intersect within . +/- 0.025mm. Angular accuracy between shafts . +/- 5min. Mounting distance tolerance +/- 0.05mm. Standard tolerances, unless otherwise stated ±0.25 mm.
Steel Bevel Gear Mod 5 4:1 16T/64T (SRB50/4N)
Steel Bevel Gear Mod 5 4:1 16T/64T (SRB50/4N)
Part No. | 7707-459 |
Code /Ratio | SRB50/4N |
Pitch Module | 5 |
No. Teeth | 16 |
dp (mm) | 80 |
A+V (mm) | 184 |
dm (mm) | 65 |
Bore | 16 |
F (mm) | 36 |
A (mm) | 60.44 |
de (mm) | 94.5 |
S (mm) | 4 |
Lm (mm) | 22.1 |
Part No. | 7707-459 |
Code /Ratio | SRB50/4N |
Pitch Module | 5 |
No. Teeth | 64 |
dp (mm) | 320 |
A+V (mm) | 105 |
dm (mm) | 170 |
Bore | 20 |
F (mm) | 320 |
A (mm) | 10 |
de (mm) | 35 |
S (mm) | |
Lm (mm) |
Every effort is taken to ensure the accuracy of the table data
Design variations and errors although rare may occur